ENPTES Free trial

Control dynamics: gate, compressor and limiter

Cut the noise between phrases with the gate, make the voice more even with the compressor and protect against peaks with the limiter.

Step by step

  1. On the channel strip, click FX.
  2. Open the Dynamics tab.
  3. Turn on the Gate, Compressor or Limiter switch.
  4. Adjust the knobs. The bar beside them shows how much is being reduced.

Gate

The gate cuts what falls below the Threshold, like the noise between phrases. Range sets how much it lowers. Attack, Hold and Release set how fast it opens and closes.

Compressor

The compressor holds down peaks and makes the voice more even. Above the Threshold, it reduces the sound according to the Ratio: at 3:1, every 3 dB above become 1 dB. Knee makes the compression start more gently. Gain brings the volume back up after compressing.

Limiter

The limiter never lets the sound go above the Ceiling. It is the final protection against clipping. The default is −1 dB.

Questions

Where do I put the limiter to protect the stream?

On the Master. Click FX on the Master strip and turn on the Limiter in the Dynamics tab.

See also

Still have questions? Write to suporte@nwk.com.br.