Step by step

Click “⚙ Settings” and open the “Project” tab.
Choose the “Resolution” and the “Frame rate”.
With streaming and recording stopped, click “Apply now”.

Resolution

The options are Full HD · 1920 × 1080 and 4K · 3840 × 2160.

Frame rate

Rate	Common use
60	sports, motion
59.94	TV standard in Brazil/US
50	TV standard in Europe
30	internet
29.97	TV in Brazil/US, NTSC cameras
25	Europe (PAL)
24	cinema
23.976	cinema on NTSC cameras

Choose the same rate as your cameras. That way the image does not repeat or skip frames.

Applying

Setting it here does not start anything: the stream only starts with the LIVE button. The change takes effect after Apply now, and only while off air. The image stops for about 3 seconds; the inputs and the session stay the same.

Inputs outside the project rate

The INPUTS OUTSIDE THE PROJECT RATE section lists the video inputs that do not match the project. If everything is right, it shows ✓ All video inputs match the project. See what to do in input with a different frame rate.

Outputs follow the project

The OUTPUTS FOLLOW THE PROJECT section summarizes the resolution and rate of the stream and the recording. Destinations, bitrate and format are in the ⚙ next to LIVE and RECORD.

Choose the resolution and frame rate