# Choose the resolution and frame rate

In Settings › Project, choose Full HD or 4K and the frame rate. Recording, streaming and NDI follow this choice.

> NWK Live Production · https://nwkglobal.com/help/resolution-and-frame-rate/ · Setor 360 Tecnologia e Eventos Ltda (CNPJ 68.185.118/0001-75)

## Step by step

1. Click “⚙ Settings” and open the “Project” tab.
2. Choose the “Resolution” and the “Frame rate”.
3. With streaming and recording stopped, click “Apply now”.


## Resolution
The options are Full HD · 1920 × 1080 and 4K · 3840 × 2160.



## Frame rate
RateCommon use60sports, motion59.94TV standard in Brazil/US50TV standard in Europe30internet29.97TV in Brazil/US, NTSC cameras25Europe (PAL)24cinema23.976cinema on NTSC camerasChoose the same rate as your cameras. That way the image does not repeat or skip frames.



## Applying
Setting it here does not start anything: the stream only starts with the LIVE button. The change takes effect after Apply now, and only while off air. The image stops for about 3 seconds; the inputs and the session stay the same.



## Inputs outside the project rate
The INPUTS OUTSIDE THE PROJECT RATE section lists the video inputs that do not match the project. If everything is right, it shows ✓ All video inputs match the project. See what to do in [input with a different frame rate](https://nwkglobal.com/help/frame-rate-warning/).



## Outputs follow the project
The OUTPUTS FOLLOW THE PROJECT section summarizes the resolution and rate of the stream and the recording. Destinations, bitrate and format are in the ⚙ next to LIVE and RECORD.